1.8 KiB

Raw Blame History

MyEMS BACnet Service

Introduction

This service is a component of MyEMS to acquire data from BACnet devices

Prerequisites

bacpypes

mysql.connector

Installation

Download and install MySQL Connector:

    $ cd ~/tools
    $ wget https://dev.mysql.com/get/Downloads/Connector-Python/mysql-connector-python-8.0.20.tar.gz
    $ tar xzf mysql-connector-python-8.0.20.tar.gz
    $ cd ~/tools/mysql-connector-python-8.0.20
    $ sudo python3 setup.py install

Download and install bacpypes library

    $ cd ~/tools
    $ git clone https://github.com/pypa/setuptools_scm.git
    $ git clone https://github.com/pytest-dev/pytest-runner.git
    $ git clone https://github.com/JoelBender/bacpypes.git
    $ cd ~/tools/setuptools_scm/
    $ sudo python3 setup.py install
    $ cd ~/tools/pytest-runner/
    $ sudo python3 setup.py install
    $ cd ~/tools/bacpypes
    $ sudo python3 setup.py install
    $ sudo ufw allow 47808

Install myems-bacnet service

    $ cd ~
    $ git clone https://github.com/MyEMS/myems.git
    $ cd myems
    $ git checkout master (or the latest release tag)
    $ sudo cp -R ~/myems/myems-bacnet /myems-bacnet

Eidt the config config

    $ sudo nano /myems-bacnet/config.py

Setup systemd service:

    $ sudo cp /myems-bacnet/myems-bacnet.service /lib/systemd/system/
    $ sudo systemctl enable myems-bacnet.service
    $ sudo systemctl start myems-bacnet.service

Add Data Sources and Points in MyEMS Admin

Data source protocol:

bacnet-ip

Data source connection example:

{"host": "192.168.0.3", "port": 47808}

Point address example:

{"object_id":3002786,"object_type":"analogValue","property_array_index":null,"property_name":"presentValue"}

References

[1]. http://myems.io

[2]. http://bacnet.org

[3]. https://github.com/JoelBender/bacpypes

1.8 KiB Raw Blame History